Precizan, pratite putanju putem interneta, ukucate njegove koordinate i prikaže vam tačno grad i ulicu gde se osoba u tom trenutku nalazi. Ima punjivu bateriju čija je autonomija do 30 sati a posebna baterija napaja sat koja se ne menja. Muški i ženski model, punjiva baterija, može se naravno koristiti i za praćenje auta ali je prevashodno namenjen praćenju članova porodice, starijih osoba koji pate od senilnosti, radnika, u raznim poslovima i prilikama u kojima procenite da je radi određene bezbednosti to neophodno primeniti.
This manual shows
how to operate the device smoothly and correctly. Make sure to read this manual
carefully before using this product. Please note that specification and information
are subject to changes without prior notice in this manual. Any change will be
integrated in the latest release. The manufacturer assumes no responsibility for
any errors or omissions in this document
Summary
Working Based on existing GSM/GPRS network and GPS satellites, this product can locate and monitor any remote targets by SMS or GPRS.
Application
l Protecting child / the old/ the disabled / pet etc.
Providel peace-of-mind for businessmen.
Tracking criminals secretlyl
Function and Feather
Appearance Introduction
GPS-800G has 5 buttons , ON/OFF button , mode button, SOS button, Call 1
button and Call 2 button .
(1) ON/OFF button : open or close the device .
(2) Mode button : interface switching , from clock to number clock to location
information
(3) SOS Button : when you need help ,then you can press the button ,then
the device will turn to call the three alarm phone number
(4) Call 1 and Call 2 button : you can press any one button to call the
number have been stored to find help .
Operation
(1) Open and Close the device
Long-press ON/OFF button with 3 second ,then will open the device and enter
the main interface, long-press it again with 3 second ,then it will be closed .
(2) Mode switching
Press Mode button ,the you can change the interface mode .
(3) SOS
Press SOS button ,then it will turn on call the three number have been stored,
then interface like below :
As long as a number is be hung up ,then you will see blow interface
Finish the communication ,then it will be hung down automatically .
(4) Call actively After you store the three alarm phone number ,you may press Call 1 or Call 2
,then you will enter the Call 1 or Call 2 interface , you can hang up it ,then you
can communicate with other person with two-way mode.
(5) Communication and Auto communication function .
If someone call the device ,then you will see the interface , then you
can hang up it , if the calling cann’t be hung up ,then it will hang up
automatically after 30 seconds。
Notice:
Server 1 mode have a calling ,first you will see a interface of calling ,after 15
seconds ,you will hear the ringing .
Server 2 mode have a calling , you will hear the ringing directly .
(6) Auto monitor function
Any one number of three number send command to device , the device will
call the number automatically , after the number hang up , the device will enter
the state of monitor without any prompt .
(7) Position inquiry
Server 1 mode
Any one number of three alarm phone send command (123) to device ,then the device may don’t be hung up, then the number will received a SMS including position link, then if your mobile phone support GPRS function , you can enter the link directly and find your position realtime . If the GPRS signal is good ,then you can receive second SMS including link after 3 second again , then position is more accurate than last position information .
Server 2 mode
Any one number of three alarm phone send command (123) to device ,then the device may don’t be hung up, then the number will received a SMS including coordinate (latitude and longitude ) information, but hasn’t link information . Use any other two number send command (456) to device , the number will receive a coordinate information within 1 min .
Notice :
If you want to inquiry the position in the case of without GPS signal , then you will
received the position information last time, and you also will see the detailed time of
the position information.
Accessories
Specification
Command information
C Command Function Note
1
*ST,ID,D7,number1,number2,number3 #
Set alarm number They are SOS number , Call 1 and Call 2 number
2 *ST,ID,D1,C1# Change server mode Change server mode to server 1
3 *ST,ID,D1,C2# Change server mode Change server mode to server 2
4 *ST,ID,D2,alarm number# Auto monitor setting
When a alarm number is be hung up , then device
will monitor Automatically.
5 123 Get position information Coordinate information and link information

